Start with Yakima County’s Food Inspections page to open the official results dashboard. An inspection marked Passed can still require reinspection. The county explains that repeated or ongoing critical risk factors may trigger a follow-up even when the business passed the initial inspection. Read the pass/fail result, point details, and any additional outcome together before deciding what the visit established.
The county adds new results monthly to its Food Inspection Results Dashboard. It also warns that a result describes conditions observed during that visit and may not reflect conditions today.
Read the visit result and the next action separately
Yakima Health District’s Food Inspections page divides the result language into two layers.
Pass or Fail summarizes the initial inspection. The county describes Passed as few or no critical risk factors, with issues corrected during the inspection when applicable. Failed means several critical factors were found and some may have been corrected while follow-up remained necessary.
Additional Outcomes describe what must happen next:
| Outcome | What the county says it means | What it does not prove |
|---|---|---|
| Re-inspection Required | A follow-up will verify correction of repeated or ongoing critical risk factors, even if the initial inspection passed | That the correction has already been verified |
| Compliance Required | Critical risk factors remain and more follow-up is needed | That the business closed or later complied |
| Office Conference | The business must meet with YHD to address critical factors and create a correction plan | That a correction plan was completed |
Record both layers when the full report exposes them. If the dashboard row shows only one compact INSPECTION RESULTS label, request the full report before assuming there was no additional instruction.
Keep red and blue points out of one improvised grade
Yakima identifies red violations as Critical Risk Factors more likely to cause foodborne illness. It identifies blue violations as Good Retail Practices that are lower-risk but still important to correct. The county’s sample inspection form has RED POINTS, TOTAL POINTS, and REPEAT RED ITEMS headers, assigns point values to individual items, and separates red and blue item sections.
The dashboard’s COMMENTS field often condenses point figures and numbered observations into one line. When two figures appear around a slash, preserve the pair exactly and use the listed items or full report to determine what each figure means. Do not label the second figure a blue-points total unless the record does, read the slash as a fraction, add the figures into a homemade score, or import a pass threshold from another county.
The form also uses status marks such as IN for in compliance, OUT for not in compliance, N/O for not observed, N/A for not applicable, CDI for corrected during inspection, and R for repeat violation. A corrected-during-inspection mark explains why a report can pass while still documenting an observed problem. A repeat red item can explain why the county requires another visit even after the immediate condition was addressed.
For more context on separating a total from its findings, use the site’s violation-reading guide.
Use the dashboard as an index to the dated event
The live Power BI dashboard displayed these columns when checked:
- FACILITY NAME
- INSPECTION DATE
- INSPECTION TYPE
- INSPECTION RESULTS
- COMMENTS
- ADDR FULL LINE#
- SITE CITY
It also exposed result filters for Complete, Compliance Required, Failed, Inspection Attempted, Passed, Photo Verification Required, and Re-inspection Required, plus a city filter. These fields help narrow the table, but they do not replace the full report.
Match the facility name with the full address and city before reading the event. Then save the inspection date, type, result, and comments as one row. Avoid combining similarly named businesses or treating an 8-Week, Follow Up, Compliance, Mobile, Catering, or Routine inspection as interchangeable.
The dashboard and county page did not state a complete historical start date when checked. Monthly updates describe the publishing cadence, not a guaranteed retention window. A blank table result therefore supports only a narrow statement: the checked dashboard did not show the record under those filters.
Follow-up and compliance are different rungs
Yakima defines a Follow-up as an inspection after a routine visit to confirm corrections. It defines a Compliance inspection as the next stage when an establishment remains out of compliance after a follow-up. Keep those visit types in order.
A useful chronology has one line per event:
- Initial visit: type, date, Red Points, Total Points, listed item details, and Passed or Failed.
- Additional outcome: Re-inspection Required, Compliance Required, Office Conference, or another stated action.
- Later visit: Follow Up or Compliance inspection and its exact result.
- Terminal evidence: the report language that says what was corrected or what further action remained.
The site’s reinspection follow-up guide can help organize the sequence. Do not write “all violations resolved” from a later Passed label alone when the comments or report identify only some items.
Emergency inspections do not define every reopening
The county places Complaint, Food-Borne, Surveillance, and Other inspections under special-purpose events outside the regular schedule. It says Other is typically used after emergencies such as fires or floods to ensure that a facility is safe to reopen.
That description is not a universal closure workflow. An Other inspection may answer a particular fire or flood reopening question, but it does not mean every closure, permit action, or reopening will use that type. Likewise, Complaint identifies why the inspection occurred; it does not establish that every allegation was confirmed.
When closure or reopening matters, obtain the full inspection report and any separate agency action that states the operating restriction and later authorization. Keep a dated closure record apart from a later inspection. The site’s closure and permit guide explains why a past adverse action is not proof of present status.
Ask for the full report when the compact row stops short
Use the dashboard row to identify the business and event, then request the full report when you need item status, correction timing, an office-conference outcome, or older history. Yakima Health District directs readers to its Environmental Health Help Desk at YHD.Help.Desk@co.yakima.wa.us or 509-249-6508 for a full report about a specific business.
Provide the facility name, full address and city, inspection date or date range, inspection type, and the dashboard result. If the question concerns follow-up, include the initial and later dates. Ask for the complete report and any stated correction, compliance, closure, or reopening disposition rather than a general assessment of current safety.
Official sources checked September 27, 2026.